Thread Rating:
  • 423 Vote(s) - 2.84 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mag lock problem
#1
Hi All

I have a set of 240v gate motors on a CB1 controll box. At the weekend we had a power cut and since then the maglock relay pulses on and off the gates open and close as normal all photo cells are ok just the maglock. For the moment I have pulled the relay out to stop it.
Also the red led to the right of the transformer is pulsing if this means anything.
Any help will be appretiated.

Many thanks.

Rich
Reply
#2
This sounds like the power cut has resulted in a power surge and blown the PSU that is powering the Magnetic Lock and you will need a new PSU hopefull the power surge has not damaged the magnetic lock but without trying a new PSU you wont know
EasyGates Manuals - Directory of Manuals and Help Guides

Smart Home Matters - Smart Home News
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diagram for mag lock on a CB124EV Defender 8 7,559 12-07-2022, 11:40 AM
Last Post: SamA
  Problem with delay time CB11 milan 2 10,803 04-10-2021, 01:44 AM
Last Post: DesmondVog
  Chamberlain Liftmaster gate problem CB1 Armstrong 2 30,585 13-06-2019, 11:46 AM
Last Post: Pop Alexandra
  CB22 problem??? Bakota 0 9,214 16-11-2014, 02:25 PM
Last Post: Bakota
  Remote problem Nickhh 1 9,844 30-09-2014, 04:48 PM
Last Post: Technologic Systems
  liftmaster CB11 hold gate open problem sparkey 5 29,987 13-05-2013, 08:17 AM
Last Post: brucekwilles
  Problem with CB11 Board Michael 1 11,520 08-05-2013, 11:32 AM
Last Post: Mark
  Chamberlain Liftmaster gate problem CB1 tentotwo 1 12,923 28-03-2012, 12:55 PM
Last Post: Mark
  CB11 Programming Problem dwanee 1 11,870 19-04-2011, 03:59 PM
Last Post: Mark
  Mag lock wiring diagram for SCS300k elliot330 1 17,751 28-05-2009, 10:38 AM
Last Post: easygates

Forum Jump:


Users browsing this thread: 1 Guest(s)