Thread Rating:
  • 470 Vote(s) - 2.71 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Photocell configuration for CB11
#5
Hi, if you are talking about overall height, i would not like to fit a pair of photocells at 200mm, at this height they would certainly be to low and the infra red would travel underneath most cars underside. We tend to fit photocells at a minimum of 500mm from the ground.

We also wire the exit loop into safety aswell, in series with the internal photocells.

Carl.
Reply


Messages In This Thread
Photocell configuration for CB11 - by Malcolm - 07-08-2008, 05:39 PM
RE: Photocell configuration for CB11 - by Malcolm - 12-08-2008, 08:09 AM
RE: Photocell configuration for CB11 - by Mark - 13-08-2008, 12:05 PM
RE: Photocell configuration for CB11 - by Home IQ - 16-08-2008, 12:28 PM
RE: Photocell configuration for CB11 - by Malcolm - 28-08-2008, 09:27 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  CB11 Multiple Keypad support Pigsfoot 1 2,250 12-08-2022, 08:14 AM
Last Post: Michael
  Problem with delay time CB11 milan 2 10,951 04-10-2021, 01:44 AM
Last Post: DesmondVog
  LiftMaster SUB300M + CB11 fault jonesy1991 0 10,836 25-01-2016, 02:51 PM
Last Post: jonesy1991
  CB11 controller BrianP 2 13,899 16-09-2015, 08:58 AM
Last Post: Gateguy
  photocell lights off hwjr_easygates 1 11,142 03-06-2015, 04:23 PM
Last Post: Sav
  liftmaster CB11 hold gate open problem sparkey 5 30,611 13-05-2013, 08:17 AM
Last Post: brucekwilles
  Problem with CB11 Board Michael 1 11,625 08-05-2013, 11:32 AM
Last Post: Mark
  230v Lyn400 CB11 Board Capacitor req. redbluetwo 5 22,778 11-10-2011, 01:11 PM
Last Post: Mark
  CB11 control box Intercom release button not working Moreteyne 0 8,993 14-09-2011, 03:14 PM
Last Post: Moreteyne
  CB11 Programming Problem dwanee 1 11,956 19-04-2011, 03:59 PM
Last Post: Mark

Forum Jump:


Users browsing this thread: 1 Guest(s)