Thread Rating:
  • 235 Vote(s) - 2.77 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LiftMaster SUB300M + CB11 fault
#1
hello!

Around 3 years ago we fitted 2 sets of twin leaf gates, both with the exact same components, (a pair of SUB300M motors, and CB11 control panels with lift master photo cells). around a week after the gates were fitted the master leaf of the second pair of gates were forced open by a old friend. since this event we have had hit and miss problems with the pair of gates, mainly consisting of the gates not closing consistently (stopping short and tripping the RCD ), we changed out the motor last year and all was fine for a while but recently we have had problems again (although the gates are closing and opening properly while they are working fine).

On closer inspection it appears that the CB11 seems to trip the RCD when it resets after programming both leafs. any ideas on this would be appreciated as were getting close to giving up. i dont want to spend the money on new motors and control panel without asking you guys for help.


thank you in advance

Chris
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Liftmaster CB1 gates started to open themselves telnet123 4 2,278 01-01-2020, 09:43 AM
Last Post: pronosoft
  Chamberlain Liftmaster gate problem CB1 Armstrong 2 12,010 13-06-2019, 11:46 AM
Last Post: Pop Alexandra
  Liftmaster sliding gate Kar1e 1 4,781 08-08-2017, 11:23 AM
Last Post: Sav
  Problem with delay time CB11 milan 1 3,871 25-05-2017, 01:07 PM
Last Post: Ryan Baker
  Liftmaster SCS300K - stop/go mtuk100 1 4,437 18-04-2017, 09:31 AM
Last Post: Automatic-TC
  CB24 delay to close random fault stuartdsutton 0 3,656 23-09-2015, 11:38 AM
Last Post: stuartdsutton
  CB11 controller BrianP 2 6,638 16-09-2015, 08:58 AM
Last Post: Gateguy
  Liftmaster xscs300-24 coops 2 6,280 10-08-2015, 03:49 PM
Last Post: coops
Rolleyes Chamberlin Liftmaster Professional (CB24 & dual LYN400.24v) SDL 4 18,030 29-12-2013, 02:26 PM
Last Post: Tussun
  Liftmaster SLY 300 Philg1965 2 10,611 06-08-2013, 07:04 PM
Last Post: Philg1965

Forum Jump:


Users browsing this thread: 1 Guest(s)