Photocell configuration for CB11
|
Photocell configuration for CB11
|
13-08-2008, 12:05 PM
The EN Regulations cover the whole installation it is down to the installer to install the photocells in the circuit to achive the safest setup for each indevidual install. The Liftmaster instructions are an example of the setup as each installation is different you need to decide which circuits are best to use.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Photocell configuration for CB11 - by Malcolm - 07-08-2008, 05:39 PM
RE: Photocell configuration for CB11 - by easygates - 11-08-2008, 03:44 PM
RE: Photocell configuration for CB11 - by Malcolm - 12-08-2008, 08:09 AM
RE: Photocell configuration for CB11 - by Mark - 13-08-2008, 12:05 PM
RE: Photocell configuration for CB11 - by Home IQ - 16-08-2008, 12:28 PM
RE: Photocell configuration for CB11 - by Malcolm - 28-08-2008, 09:27 AM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| CB11 Multiple Keypad support | Pigsfoot | 1 | 2,251 |
12-08-2022, 08:14 AM Last Post: Michael |
|
| Problem with delay time CB11 | milan | 2 | 10,956 |
04-10-2021, 01:44 AM Last Post: DesmondVog |
|
| LiftMaster SUB300M + CB11 fault | jonesy1991 | 0 | 10,836 |
25-01-2016, 02:51 PM Last Post: jonesy1991 |
|
| CB11 controller | BrianP | 2 | 13,900 |
16-09-2015, 08:58 AM Last Post: Gateguy |
|
| photocell lights off | hwjr_easygates | 1 | 11,143 |
03-06-2015, 04:23 PM Last Post: Sav |
|
| liftmaster CB11 hold gate open problem | sparkey | 5 | 30,619 |
13-05-2013, 08:17 AM Last Post: brucekwilles |
|
| Problem with CB11 Board | Michael | 1 | 11,626 |
08-05-2013, 11:32 AM Last Post: Mark |
|
| 230v Lyn400 CB11 Board Capacitor req. | redbluetwo | 5 | 22,780 |
11-10-2011, 01:11 PM Last Post: Mark |
|
| CB11 control box Intercom release button not working | Moreteyne | 0 | 8,994 |
14-09-2011, 03:14 PM Last Post: Moreteyne |
|
| CB11 Programming Problem | dwanee | 1 | 11,957 |
19-04-2011, 03:59 PM Last Post: Mark |
|
