24-01-2011, 10:56 AM
Hi All
I have a set of 240v gate motors on a CB1 controll box. At the weekend we had a power cut and since then the maglock relay pulses on and off the gates open and close as normal all photo cells are ok just the maglock. For the moment I have pulled the relay out to stop it.
Also the red led to the right of the transformer is pulsing if this means anything.
Any help will be appretiated.
Many thanks.
Rich
I have a set of 240v gate motors on a CB1 controll box. At the weekend we had a power cut and since then the maglock relay pulses on and off the gates open and close as normal all photo cells are ok just the maglock. For the moment I have pulled the relay out to stop it.
Also the red led to the right of the transformer is pulsing if this means anything.
Any help will be appretiated.
Many thanks.
Rich