Thread Rating:
  • 277 Vote(s) - 2.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BFT Rigel 5 Remote sync
Hi there,

I am trying to add another BFT Mitto 2 remote to my Rigel 5 box, I tried both cloning another remote and now following instructions I found online (and also on these boards) -

I tried adding the remote to the system via the box(going into the programming menu, selecting radio, add start, pressing the hidden button) with no luck!

The remote is the new type so I depressed both top front buttons as the hidden button but it wouldn’t seem to scroll off the “hidden button” scrolling text on the LCD and tell me to release then click the desired button.

Am I missing somthing obvious in the instructions or is there some other menu setting I need to change/another method of adding the new remote?

Thanks for the help,

From what you have listed this sounds like you are doing things correctly

But just to double check please follow the instructions on our help pages ate the following link

Possibly Related Threads…
Thread Author Replies Views Last Post
  Strange gate operation Rigel controller Philreghse 0 2,863 10-06-2019, 09:18 AM
Last Post: Philreghse
  V2 Phox 2-Channel Remote Control moldy1 1 1,777 27-02-2019, 08:45 AM
Last Post: TerryMulhern
  Help programming SUN 433 4CH remote jedimatafez 2 2,382 24-02-2019, 08:04 AM
Last Post: jedimatafez
  Programming remote Luke 1 3,293 16-05-2018, 07:38 PM
Last Post: Automatic-TC
Question Impulse versus permanent “push button” remote control ajberna 1 6,198 08-08-2017, 02:02 PM
Last Post:
  Rigel 4 and Clonix not receiving signals apbran 6 10,390 26-03-2017, 05:32 PM
Last Post: apbran
  BFT Rigel LUX FC actuators erratic Berrystead 0 2,514 31-08-2016, 08:19 PM
Last Post: Berrystead
  Proteco remote gate programing Krile007 1 11,204 07-02-2014, 10:35 AM
Last Post: Sav
  BFT Rigel 5 graham 2 7,973 20-05-2013, 01:55 PM
Last Post: graham
  cloning remote supermeske 0 3,846 22-11-2012, 08:57 PM
Last Post: supermeske

Forum Jump:

Users browsing this thread: 1 Guest(s)