Thread Rating:
  • 295 Vote(s) - 2.69 Average
  • 1
  • 2
  • 3
  • 4
  • 5
liftmaster CB11 hold gate open problem
#5
(02-02-2013, 11:47 AM)sparkey Wrote:

o.k been back to site, put it in carpark mode, the trigger from the video entry on 17 and 20 the new latching remote 18 and 20, all works as it should....the only thing that does not work is the trigger to close from the chamberlain photo cells after you have driven out, you have to wait for the timer to close....although they do work for safety, if operated while closing they open the gates.....just hope the customer does not notice this/complain about it!

The Chamberlain/Liftmaster CB11 does NOT have a close after photocell function it has to close on timmer so it sounds like the System is working as it should. The close after photo function is not very safe.
EasyGates Manuals - Directory of Manuals and Help Guides

Smart Home Matters - Smart Home News
Reply


Messages In This Thread
RE: liftmaster CB11 hold gate open problem - by Mark - 08-02-2013, 10:59 AM
RE: liftmaster CB11 hold gate open problem - by brucekwilles - 13-05-2013, 08:17 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  My swing gates are stuck at 50% open jctrotting 1 459 11-04-2024, 08:11 AM
Last Post: JoeF
  Liftmaster LA400 Defender 6 9,710 03-08-2023, 12:26 PM
Last Post: Torantrieb
  CB11 Multiple Keypad support Pigsfoot 1 2,210 12-08-2022, 08:14 AM
Last Post: Michael
  odd liftmaster scs300-24 scopie88 3 11,681 13-04-2022, 10:20 AM
Last Post: JoeF
  Problem with delay time CB11 milan 2 10,901 04-10-2021, 01:44 AM
Last Post: DesmondVog
  Liftmaster MYQ Internet Gateway Registration/Connection issues! Carmody 0 11,894 09-03-2021, 02:46 PM
Last Post: Carmody
  Advice on new gate install - LIFTMASTER LYN424 Leeb 1 15,768 22-02-2021, 08:48 PM
Last Post: russ
  Liftmaster MYQ Internet gateway koen_dc 1 16,681 24-04-2020, 09:11 AM
Last Post: RyanB
  Loose gate stop but what wrench to use? bomitie 2 10,243 02-04-2020, 12:06 PM
Last Post: bomitie
  Liftmaster CB1 gates started to open themselves telnet123 4 25,414 01-01-2020, 09:43 AM
Last Post: pronosoft

Forum Jump:


Users browsing this thread: 1 Guest(s)