Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My swing gates are stuck at 50% open
#1
Hi my swing gates won't operate and are stuck at 50% open , I learned the CB11 control board and removed the jumper and pressed the L1 button and the photo cells are just flashing and not a sound or movement from the motors on the gates , can you help and point me in the correct direction to fix this issue thanks Joe
Reply
#2
(25-03-2024, 12:41 AM)jctrotting Wrote: Hi my swing gates won't operate and are stuck at 50% open , I learned the CB11 control board and removed the jumper and pressed the L1 button and the photo cells are just flashing and not a sound or movement from the motors on the gates , can you help and point me in the correct direction to fix this issue thanks Joe

Hi,

Thanks for the email.

can you confirm the link is still in the stop terminal and the resistor in the edge terminal.

Joe
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Sliding gates are opening/closing like someone is going in /out. gandreja 3 8,381 14-04-2020, 01:45 PM
Last Post: RyanB
  Liftmaster CB1 gates started to open themselves telnet123 4 25,241 01-01-2020, 09:43 AM
Last Post: pronosoft
  CB1 How to learn the gates telnet123 1 14,826 30-04-2018, 01:45 PM
Last Post: Tim
  Gates dont close after being held open jaybee 1 11,750 18-06-2013, 09:23 AM
Last Post: Blakey111
  liftmaster CB11 hold gate open problem sparkey 5 30,219 13-05-2013, 08:17 AM
Last Post: brucekwilles
  Swing Gate Controller 0 7,887 19-07-2009, 06:50 PM
Last Post: Guest

Forum Jump:


Users browsing this thread: 1 Guest(s)