Thread Rating:
- 242 Vote(s) - 3.05 Average
- 1
- 2
- 3
- 4
- 5
|
BFT controlled gates open but don't close
|
Posts: 3
Threads: 0
Joined: May 2020
Reputation:
0
(16-09-2016, 02:33 PM)MikeJep Wrote: Hi all - we've a couple of swing arm gates controlled by a BFT Aries. The system is about 20 years old but has been reliable till now.
Recently the gates opened then wouldn't shut. We could unlock the arms and manually shut them ok. Once locked again they would open on demand perfectly but, once open fully, wouldn't close again. There is plenty of ticking going on from the relays as the shut cycle is supposed to happen and there is even power to the motors (haven't tested polarity) - but no movement. The gates move freely once unlocked
Any ideas much appreciated.
|
| Messages In This Thread |
RE: BFT controlled gates open but don't close - by John24hr - 30-05-2020, 11:43 PM
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
Gate wont close issue |
MR_ROBOT |
3 |
9,797 |
11-04-2024, 08:08 AM
Last Post: JoeF
|
| |
Ecosol/Kustos doesn't open and close fully? |
supremee |
3 |
2,431 |
09-02-2024, 03:12 PM
Last Post: EdwardBab
|
| |
Thalia - Photocell Close |
J to the D |
1 |
857 |
19-01-2024, 09:54 AM
Last Post: Michael
|
| |
BFT LUX2B Intermittent failure to open |
brookkr |
4 |
8,087 |
07-09-2023, 08:32 AM
Last Post: benbrooks
|
| |
BFT Thalia ‘Hold Open’ |
hehasmoments |
5 |
4,356 |
24-08-2023, 01:38 PM
Last Post: JoeF
|
| |
Set remote to “only open” gate |
mark123499 |
4 |
3,897 |
30-05-2023, 01:57 PM
Last Post: mark123499
|
| |
Gates not fully closing |
stefen1978@hotmail.co.uk |
2 |
2,774 |
10-10-2022, 10:07 AM
Last Post: Michael
|
| |
RCD trip on close LUX 2B |
DP86 |
3 |
6,708 |
14-04-2022, 08:55 AM
Last Post: benbrooks
|
| |
Best BFT for closed aluminium gates |
rafp |
1 |
3,023 |
13-04-2022, 11:38 AM
Last Post: Michael
|
| |
Remote only working close up |
Uphill |
0 |
2,651 |
03-10-2021, 07:50 PM
Last Post: Uphill
|
Users browsing this thread: 1 Guest(s)
