Thread Rating:
  • 7 Vote(s) - 3.71 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Best BFT for closed aluminium gates
#1
Hi,

We have some dual leaf aluminum gates.

2m high by 1.75m per leaf and about 50kg per gate.

We arent in an especially exposed or windy location and appreciate we will need to leave open during high winds but which BFT swing arm openers are best?

I have had conflicting advice between the BFT lux (230v) and the BFT Giuno 24v as to which is recommded. The Giuno seems to be most modern but concern the obstacle detection could pose issues?

Any advice greatly appreciated.

Thanks
Reply
#2
Hi,

Me personally i would opt for a 230v for closed boarded gates. i would also use safety edges edges wherever there could be potential crushing hazards. Hope this helps.

Regards
Easygates Ltd
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Gates not fully closing stefen1978@hotmail.co.uk 2 2,660 10-10-2022, 10:07 AM
Last Post: Michael
  BFT controlled gates open but don't close MikeJep 5 19,638 04-01-2022, 09:58 AM
Last Post: JamieF
  Gates not closing (BFT Thalia btl2 and Bft Desme) Joel23M 2 7,661 17-01-2021, 01:25 PM
Last Post: Joel23M
  Altair-P gates now move in opposite direction with any change to wiring william.helsby 1 6,809 24-05-2020, 08:08 PM
Last Post: william.helsby
  Advice on photocells for BFT gates weave 1 5,626 14-04-2020, 01:34 PM
Last Post: RyanB
Question Bft Rigel 5 Gates - Sticking when opening dannys1 3 57,633 23-04-2019, 10:11 AM
Last Post: JoeF
  BFT wooden gates won’t open Dreddy88 0 6,344 10-08-2018, 07:46 PM
Last Post: Dreddy88
  How to periodically keep gates open ?? !! thomasario 6 39,567 13-03-2018, 04:35 PM
Last Post: thomasario
  Gates not working george goddard 0 8,128 12-03-2018, 09:16 PM
Last Post: george goddard
Question Bft Rigel 5 Gates - Sticking when opening dannys1 3 17,185 23-08-2017, 02:39 PM
Last Post: Access-Control-Ltd

Forum Jump:


Users browsing this thread: 1 Guest(s)