not opening

Thread Rating:

479 Vote(s) - 2.84 Average
1
2
3
4
5

Linear Mode

not opening

nskeates Offline

Junior Member

Posts: 16
Threads: 2
Joined: Mar 2010
Reputation: 0

#26

06-04-2010, 09:56 PM

resoldered the joints on the small board that sits inside the ram that the limiter switches are wire to.put it allback together and the gates worked fine. Big Grin

then i adjusted a limiter switch position on the other gate and it all started going wrong !! gate would only move about 2" then stop, after a few presses of the fob button i now get nothing !!! Sad

i noticed on the control panel when gates were only moving a little i was getting a code ANP or AMP ?

any suggestions as to what i have done as i was so pleased when the gates were working !!

Find

« Next Oldest | Next Newest »

Messages In This Thread

not opening - by nskeates - 26-03-2010, 10:40 AM

RE: not opening - by nskeates - 30-03-2010, 07:38 AM

RE: not opening - by sebabastek - 30-03-2010, 07:03 PM

RE: not opening - by easygates - 31-03-2010, 05:03 PM

RE: not opening - by nskeates - 30-03-2010, 07:49 PM

RE: not opening - by sebabastek - 30-03-2010, 09:10 PM

RE: not opening - by nskeates - 31-03-2010, 07:59 AM

RE: not opening - by sebabastek - 31-03-2010, 07:53 PM

RE: not opening - by nskeates - 31-03-2010, 09:16 PM

RE: not opening - by sebabastek - 31-03-2010, 10:05 PM

RE: not opening - by nskeates - 01-04-2010, 06:48 AM

RE: not opening - by sebabastek - 01-04-2010, 07:35 AM

RE: not opening - by nskeates - 01-04-2010, 07:49 AM

RE: not opening - by sebabastek - 01-04-2010, 08:26 AM

RE: not opening - by nskeates - 01-04-2010, 08:33 AM

RE: not opening - by sebabastek - 01-04-2010, 08:43 AM

RE: not opening - by nskeates - 01-04-2010, 08:23 PM

RE: not opening - by sebabastek - 01-04-2010, 09:36 PM

RE: not opening - by nskeates - 02-04-2010, 08:07 AM

RE: not opening - by sebabastek - 02-04-2010, 09:10 AM

RE: not opening - by nskeates - 02-04-2010, 09:55 AM

RE: not opening - by sebabastek - 02-04-2010, 02:25 PM

RE: not opening - by nskeates - 02-04-2010, 08:10 PM

RE: not opening - by nskeates - 03-04-2010, 07:36 AM

RE: not opening - by sebabastek - 03-04-2010, 12:52 PM

RE: not opening - by nskeates - 06-04-2010, 09:56 PM

RE: not opening - by sebabastek - 06-04-2010, 10:01 PM

RE: not opening - by nskeates - 07-04-2010, 10:07 AM

RE: not opening - by Guest - 29-04-2010, 11:51 AM

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	BFT Sliding Gate randomly opening and closing	AdrianMate	1	987	14-02-2024, 12:18 PM Last Post: Michael
	BFT opening problem		8	45,465	08-08-2023, 02:14 PM Last Post: JoeF
	BFT SubR not opening/closing sometimes	Jimmyboy4	3	3,016	09-01-2023, 10:29 AM Last Post: SamA
	BFT Lux 2B FC Motor not opening all the way to stopper	jc.34@outlook.com	8	8,555	19-08-2022, 09:30 AM Last Post: JoeF
	Strange opening problem	Baz1981	4	81,854	15-07-2019, 08:39 AM Last Post: SamA
	Bft Rigel 5 Gates - Sticking when opening	dannys1	3	57,903	23-04-2019, 10:11 AM Last Post: JoeF
	BFT A 40 not opening	tojo	0	6,038	06-12-2017, 11:29 PM Last Post: tojo
	Bft Rigel 5 Gates - Sticking when opening	dannys1	3	17,251	23-08-2017, 02:39 PM Last Post: Access-Control-Ltd
	Strange Gate Opening Issue	scottc	5	29,502	09-06-2017, 03:41 PM Last Post: Automatic-TC
	BFT P7 Opening Time / Not Completing Stroke	zootreeves	2	12,904	07-01-2016, 08:40 PM Last Post: zootreeves

View a Printable Version

Forum Jump:

Users browsing this thread: 1 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me