Thread Rating:
  • 7 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAAC 455D programming
#1
Hi all hoping someone would be able to help. My friend got decided to make his gates electric so got somebody to come and do it for him. The guy that started the job left my mate in the lurch and is avoiding his calls. He asked if I’d be able to do them as I’m an electrician, I told him I’ve never had anything to do with gates but agreed to help. I’ve got the 455d circuit board controlling 2 swing gates, with remote to open them. When pairing the remote was done we then went onto learning the gates which all went ok but when that was finished nothing happens with the gates when pressing the remote! Was wondering if anyone could help as contacted facc technical and had no luck from them. Thanks in advance
Reply
#2
(19-06-2020, 11:02 PM)Harrisbhreac Wrote: Hi all hoping someone would be able to help. My friend got decided to make his gates electric so got somebody to come and do it for him. The guy that started the job left my mate in the lurch and is avoiding his calls. He asked if I’d be able to do them as I’m an electrician, I told him I’ve never had anything to do with gates but agreed to help. I’ve got the 455d circuit board controlling 2 swing gates, with remote to open them. When pairing the remote was done we then went onto learning the gates which all went ok but when that was finished nothing happens with the gates when pressing the remote! Was wondering if anyone could help as contacted facc technical and had no luck from them. Thanks in advance

Hi, I had a similar problem (still have an issue), if you use a jumper lead between pins 11 and 14 does the gate operate? I also have jumper leads between pin 19 and 12 & 13 (see fig 7 in the installation manual). My issue now is that its not following the TL Complete sequence that I programmed (TL programme works perfectly).

Hope this helps
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 415 can't reset from manual to operate mode Stephen Q 1 1,153 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 2,216 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 2,907 24-06-2023, 01:06 AM
Last Post: LoneStarCycler
  FAAC 400 cbac LN 104202 obey gates 1 7,388 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 5,289 14-11-2022, 12:03 PM
Last Post: benbrooks
  FAAC sensors and Beninca R16E motor Beachcomber 7 10,646 20-07-2022, 09:50 AM
Last Post: SamA
  Faac 455 beginner help please Ghutson70@gmail.com 2 8,412 30-05-2022, 09:12 AM
Last Post: SamA
  Faac C721 trips mains when connecting transformer Gatehelp 3 6,763 24-05-2022, 08:36 AM
Last Post: SamA
  Faac Ufo Rail manual to auto mode TibiHu 1 4,925 07-03-2022, 11:03 AM
Last Post: JamieF
  FAAC NOT AUTO CLOSING. BROKEN WIRE Slick19000 3 8,305 04-01-2022, 09:48 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)