Proteco Leader rams very slow

[Mark]

Hi to everyone here

I have Proteco Leader rams on my wooden gates (inward opening) and I have noticed them starting off normally but then about half way through they slow right down, and now now that winter is here they virtually stop 2/3rds of the way through the closing cycle.

They open OK, it's just closing.

I suspect that they need greasing/oiling, but I am not sure where to put and what oil to use internally. Any advice would be much appreciated.

David

This sounds like the slow down programmed on the system. This either need disabbling or more likely the force on the gates turning up however turning up the force could make the system unsafe. I would check with proteco there selves as we dont supply the Proteco system. I think the main UK Supplier for Proteco is Gatemotors.co.uk