Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help

[JoeF]

Hello all,

I have purchased a Hikvision DS-KD8003-IME1 video intercom modular door station and I need to connect it to my sliding gate motor.

On the back of the door station there are NC1 and NO1 terminals.  I believe these are to open and close the gate.

The gate motor is a Nice ROBUS RB600. There are several terminals on this motor. Open, close, sbS, stop, Bluebus etc.

Can anyone advise which wires I need to connect from the door station to the gate motor please?


Any help would be most appreciated.

Thanks.

Hi,

Thanks for the email,

You in this instance would use the NO1 connections and the COM1 connection, this should be next to the NO connection, these connections would go into SBS (no polarity)

Regards Joe