Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I have a set of FAAC gates. They work on a master switch a sim card opening system where my phone opens the gates.
Everything was working perfectly until last week when the gates opened and closed ok but when the photocell was tripped the gates wont close unless you dial the number or flick the master switch.
I found the little white wire had broken off but cannot find the correct terminal to connect it back to.
Even with the wire not connected the gates open and close as they should. They only stop when the photocell is tripped.
Tearing my hair out in 30 degree heat.
Any help greatly appreciated.
I've images of the board and relay that triggers the sim card. Broken wire circled in red.

Possibly Related Threads…
Thread Author Replies Views Last Post
  FAAC 455d electrical interference scubabob 0 942 28-05-2021, 08:46 PM
Last Post: scubabob
  FAAC 455d electrical interference scubabob 0 840 28-05-2021, 08:22 PM
Last Post: scubabob
  Faac gate opens when photo cell beam is broken Stephen Q 5 2,657 29-03-2021, 01:53 PM
Last Post: Stephen Q
  FAAC 740 hums instead of working tkalfaoglu 1 2,596 05-02-2021, 10:41 AM
Last Post: RyanB
  FAAC S450H Oil Leaks & Filling nalayensid 3 8,642 21-01-2021, 11:11 AM
Last Post: patjer1
  FAAC roller door remote. Robinov 0 5,052 09-10-2020, 01:17 PM
Last Post: Robinov
  Faac E145s help please pm9020 2 7,339 26-08-2020, 06:29 PM
Last Post: jsw
  FAAC 455D programming Harrisbhreac 1 7,354 16-08-2020, 06:04 PM
Last Post: Henliston
  FAAC 455D won't operate Henliston 0 3,347 15-08-2020, 06:30 PM
Last Post: Henliston
  FAAC Gate Issue asifrana 0 3,946 26-07-2020, 10:53 PM
Last Post: asifrana

Forum Jump:

Users browsing this thread: 1 Guest(s)