Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Came ZLJ24
I am wanting to connect my GSM intercom to the ZLJ24 panel, instructions given are to wire to the Com port and the No port, unable to find these in the panel, 5 wires from controller , Open Pedestrian, Common, Open, AC/+VE  and  AC/GND. Any information would be VERY much appreciated,

I hope you are well. Please see the terminal descriptions below.

Terminals 3 - N/O
Terminals 1 Com

You will need to wire from the relay output on the intercom to the N/O and COM on the ZLJ24 panel. You can see this shown in the manual which i have linked below for you. You will need to refer to page 6/32 on the PDF. Note this will be using the 'Key selector and/or opening button (N.O contact)'.

I hope this has helped.

Kind regards
- Jamie

Possibly Related Threads…
Thread Author Replies Views Last Post
  Help with intercom to Came ZLJ24 paulaj 0 3,252 15-06-2020, 06:27 PM
Last Post: paulaj
  CAME ZLJ24 panel - Open gate indicator-light Domcov 1 10,739 02-05-2018, 06:18 PM
Last Post: Automatic-TC

Forum Jump:

Users browsing this thread: 1 Guest(s)