Thread Rating:
- 12 Vote(s) - 2.75 Average
- 1
- 2
- 3
- 4
- 5
NIce Aria 400 unable to program gate open/close
|
Posts: 3
Threads: 1
Joined: Jan 2020
Reputation:
0
(12-01-2020, 01:06 PM)Telboy Wrote: Just trying to complete the installation of a Nice Aria 401 kit. Problem with programming the control unit to recognise/memorise the close and open positions. I start with gate in midway position per the manual then press P3 key. Flashing warning light comes on and gate moves to close position but then stops. I expected gate to close then go to open position then close again. LED's on photocells are flashing approx once per second and the same for the Bus LED. Stop LED is on. I have checked photocells and gate stops if beam is interrupted as gate closes so appears photocells are working correctly. Checked voltage across terminals connected to motor and only 9v and power goes off once gate is closed. P3 LED is flashing which presumably indicates that the process has not been completed.
|
Messages In This Thread |
RE: NIce Aria 400 unable to program gate open/close - by Telboy - 13-01-2020, 03:25 PM
|
Possibly Related Threads… |
Thread |
Author |
Replies |
Views |
Last Post |
|
Gate stuck after opening. |
rixman |
4 |
902 |
11-04-2024, 08:10 AM
Last Post: JoeF
|
|
nice robus D400 smartphone control |
YOSH |
1 |
978 |
05-03-2024, 04:45 PM
Last Post: benbrooks
|
|
Nice MC800 Wiring issue |
Adamzsite |
2 |
975 |
05-03-2024, 04:37 PM
Last Post: Michael
|
|
nice robus troubleshooting |
tarmongaidon |
7 |
17,056 |
30-01-2024, 05:19 PM
Last Post: hasanova
|
|
Nice photo sensor issue F210 and MC824H gates won’t operate |
Tantrum |
1 |
1,970 |
04-01-2024, 10:06 AM
Last Post: Michael
|
|
Nice Robus RBA3c Wifi Relay Switch Wiring |
denis |
1 |
2,436 |
01-11-2023, 09:45 AM
Last Post: Michael
|
|
NICE MC800 Factory Reset |
bg148 |
5 |
3,475 |
12-10-2023, 01:11 PM
Last Post: JoeF
|
|
Nice MCA1 stuck open after stop command |
Khooke |
1 |
2,711 |
25-09-2023, 10:47 AM
Last Post: Michael
|
|
Problems with Aria 400 |
RohitG |
1 |
2,302 |
17-03-2023, 09:47 AM
Last Post: JoeF
|
|
Nice transmitters - compatibility |
Noghar |
6 |
6,838 |
10-10-2022, 10:02 AM
Last Post: benbrooks
|
Users browsing this thread: 1 Guest(s)