Thread Rating:
  • 48 Vote(s) - 2.73 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GiBiDi timing setup
#1
Hi.
Have a GiBiDi F/3 Plus Control Box PCB 1780 which drives a GiBiDi Modo Hydraulic Ram.
This open/closes a 5 bar farm type gate on rising hinges to lift the gate up a sloping drive.
The gate takes 30s to open as it's uphill and 15s to close as it's downhill.
There are 4 adjustment trimmers:
T1 for adjusting the opening time of the gate motor.  Doesn't seem to affect anything.
T2 for adjusting the pause for automatic closing.  Works ok.
T3 for adjusting the working time.  Very sensitive setting.
T4 for adjusting the closing delay.  Works ok.
Having trouble setting up the opening and closing times separately.
Any suggestions appreciated.
Steve
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Gibidi electric gate opening sgh123 1 10,762 26-03-2017, 12:40 AM
Last Post: Automatic-TC
  GIBIDI wiring... HELP gateman 1 6,830 20-05-2013, 09:39 AM
Last Post: Mark
  Gibidi ram slow djpitt 1 6,056 14-09-2012, 03:24 PM
Last Post: BarkerandGeary
  gibidi rams 1 7,652 18-09-2009, 02:50 PM
Last Post: Mark

Forum Jump:


Users browsing this thread: 1 Guest(s)