Thread Rating:
  • 70 Vote(s) - 2.74 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAAC 452 MPS control panel + universal RX1 Receiver
#1
Hey guys, 

Anybody could help please in telling which wire goes where, looking at the manual for my FAAC 452 control panel kindly? 
https://manuals.easygates.co.uk/PDF/misc/452-MPS.pdf

for this https://www.easygates.co.uk/universal-receiver.asp

Thanks!
Reply
#2
hi

16 and 17 that power source 24 V (16 negative) (17 positive)
14 and 9 that input for operating signal ( push button or fob) relay output from universal receiver have to be conected here
Best Regards 
Tom 
Automatic-TC
Reply
#3
Hey cheers for that.

I asked FAAC too and they gave me the below which worked too. Money well spent I’d say! Thanks!

RX needs to connect to the 452 board by connecting terminals 4 and 5

to terminal 9 and 14

Then connect the power supply to 17 or 18 which positive and 14, 15, 16 which are negatives.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 415 can't reset from manual to operate mode Stephen Q 1 1,021 Yesterday, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 2,114 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 2,818 24-06-2023, 01:06 AM
Last Post: LoneStarCycler
  FAAC 400 cbac LN 104202 obey gates 1 7,291 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 5,177 14-11-2022, 12:03 PM
Last Post: benbrooks
  FAAC sensors and Beninca R16E motor Beachcomber 7 10,529 20-07-2022, 09:50 AM
Last Post: SamA
  Faac 455 beginner help please Ghutson70@gmail.com 2 8,302 30-05-2022, 09:12 AM
Last Post: SamA
  Faac C721 trips mains when connecting transformer Gatehelp 3 6,739 24-05-2022, 08:36 AM
Last Post: SamA
  Faac Ufo Rail manual to auto mode TibiHu 1 4,910 07-03-2022, 11:03 AM
Last Post: JamieF
  FAAC NOT AUTO CLOSING. BROKEN WIRE Slick19000 3 8,266 04-01-2022, 09:48 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)