+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: FAAC Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=31)
+--- Thread: FAAC 452 MPS control panel + universal RX1 Receiver (/showthread.php?tid=6347)
FAAC 452 MPS control panel + universal RX1 Receiver - mrharrod - 16-08-2018
Hey guys,
Anybody could help please in telling which wire goes where, looking at the manual for my FAAC 452 control panel kindly?
https://manuals.easygates.co.uk/PDF/misc/452-MPS.pdf
for this https://www.easygates.co.uk/universal-receiver.asp
Thanks!
RE: FAAC 452 MPS control panel + universal RX1 Receiver - Automatic-TC - 17-08-2018
hi
16 and 17 that power source 24 V (16 negative) (17 positive)
14 and 9 that input for operating signal ( push button or fob) relay output from universal receiver have to be conected here
RE: FAAC 452 MPS control panel + universal RX1 Receiver - mrharrod - 17-08-2018
Hey cheers for that.
I asked FAAC too and they gave me the below which worked too. Money well spent I’d say! Thanks!
RX needs to connect to the 452 board by connecting terminals 4 and 5
to terminal 9 and 14
Then connect the power supply to 17 or 18 which positive and 14, 15, 16 which are negatives.