Thread Rating:
  • 211 Vote(s) - 2.83 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gates open as soon as they close
#1
Hi

Our estate has a set of gate closers with a nice MC824ah controller. It's been installed for almost 2 years now and had this same issue once before and seemingly resolved itself.
What happens is the gates open themselves to normal positions and after the programmed amount of time they close again as you would expect. However as soon and they close they automatically reopen. I can hear a relay in the controller triggering each time. Is it possible that it's fallen back in to a different models open- stop-close? Rather than set? The original installer is no longer in business and when they were, they weren't much help anyway. I am an installer of access control systems but obviously gates are different and wanted to see if there was a comon/quick fix to this fault.

TIA

Craig
Reply
#2
hi
is this gate has flashing light installed ?
if yes tell me blinking sequence after fault , this light could give some informtion about system trouble.

for example 3 short blink / 1 s pause /3 short blink - that mean gate has encountered resistance .
Best RegardsĀ 
TomĀ 
Automatic-TC
Reply
#3
(29-12-2016, 07:06 PM)Automatic-TC Wrote: hi
is this gate has flashing light installed ?
if yes tell me blinking sequence after fault , this light could give some informtion about system trouble.

for example 3 short blink / 1 s pause /3 short blink - that mean gate has encountered resistance .

Excellent, I will take a look when I get home.

Craig
Reply
#4
Excellent, I will take a look when I get home.

Craig
[/quote]

Hi Craig,

On the MC824H theres certain LEDS which give a diagnostic. The STOP LED must always be lit. The BlueBus LED should pulse once per second, if the gates get to the close position and then re open you need to check if either the BlueBus LED is not flashing twice per second or more, which would mean the gates are interrupting the front safety beams or if the Open LED lights up in which the gates have been given a further command.

You may also need to redo a learn of limits if anything has recently moved on the gates as this could be a force reversal. The gate detects an unknown force then reverses.

Let me know how you get on.
Kindest Regards,

Sav
Tel: 0845 054 5070
Fax: 0845 643 6814


Reply
#5
(04-01-2017, 12:47 PM)Sav Wrote: Excellent, I will take a look when I get home.

Craig

Hi Craig,

On the MC824H theres certain LEDS which give a diagnostic. The STOP LED must always be lit. The BlueBus LED should pulse once per second, if the gates get to the close position and then re open you need to check if either the BlueBus LED is not flashing twice per second or more, which would mean the gates are interrupting the front safety beams or if the Open LED lights up in which the gates have been given a further command.

You may also need to redo a learn of limits if anything has recently moved on the gates as this could be a force reversal. The gate detects an unknown force then reverses.

Let me know how you get on.
[/quote]


Yes the bluebus led is flashing twice per second. The stop LED is permanently lit.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Nice MC424L "hold open" feature bptra 3 8,441 10-07-2019, 10:38 AM
Last Post: JoeF
  MC424 - close automatically once open maaarek 3 8,882 03-12-2017, 10:35 AM
Last Post: Automatic-TC
  Nice Mindy - One gate doesn't open Danseri 1 5,607 19-01-2016, 11:00 AM
Last Post: Sav

Forum Jump:


Users browsing this thread: 2 Guest(s)