Thread Rating:
  • 262 Vote(s) - 2.73 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with Sly300 CB22 not closing
#1
Hello.
My sliding gate sly300 opens only, but wont close when key fob button Is pushed To close (i put new sensors on the wall and the same problem).

When I push the button I hear the motor click To try and close, but wont close. Have tried may times to reset and re-program with no success. I also replaced the capacitor, no joy.

For some reason the gate will not "learn" in program mode and won't travel between positions as expected in learn mode.
I have completed the jumper step many times but makes no difference.
Please help.
Del
Reply
#2
(25-02-2014, 05:53 PM)Del Wrote: Hello.
My sliding gate sly300 opens only, but wont close when key fob button Is pushed To close (i put new sensors on the wall and the same problem).

When I push the button I hear the motor click To try and close, but wont close. Have tried may times to reset and re-program with no success. I also replaced the capacitor, no joy.

For some reason the gate will not "learn" in program mode and won't travel between positions as expected in learn mode.
I have completed the jumper step many times but makes no difference.
Please help.
Del



All fixed reed switch gone in gate position sensor. Hens wouldn't let gate closed.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1000A remote problem macallan 5 9,937 24-04-2013, 08:30 AM
Last Post: binsonwilles
  LM 800a lamp problem jgj 1 5,496 23-07-2012, 09:41 AM
Last Post: Mark

Forum Jump:


Users browsing this thread: 1 Guest(s)