NR error code

[Bara]

Hello Dave,

Thanks for the response. I powered down, re engaged but still the problem is there. Normally the display shows in stand by mode '- -' when it receives signal from fob it turns to 'Go' then briefly 'NR' appears and comes back to '- -' [This was the original problem]

I solved this now. May be someone else will find this posting useful.

I disengaged both the motors and engaged them. Closed fully manually, re engaged again (note my gates engaged only half way through) powered up.

:-)

Works again as it should.

Thanks for all your help here in the forum and in Proteco.

Regards
Bara