Thread Rating:
  • 95 Vote(s) - 2.94 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to program new universal control to work with FAAC receiver
#2
Hello,

If you have purchased universal remote controls off ebay, im guessing they are silver and black with a red led when the button is pressed. Technology in the remote known has rolling code. These remotes are not reliable and cannot clone every remote on the market. You will probably find they are not compatible. When buying new remotes for a Faac system you will be better buying the original remotes as they are reliable and guaranteed to work.
Reply


Messages In This Thread
RE: How to program new universal control to work with FAAC receiver - by Sav - 07-01-2016, 03:26 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  FAAC Configure 443Hz remote to open partially, pause and close Ezylryb 3 4,713 11-11-2025, 03:33 PM
Last Post: Prem
  Faac 740D, Open further then limit, not closing emiel 1 6,134 26-08-2025, 02:23 PM
Last Post: Jakedugmore
  FAAC Eq45s , only Leaf A closing with remote Cummil2 1 3,889 13-03-2025, 10:06 AM
Last Post: benbrooks
  FAAC Eq45s , only Leaf A closing with remote Cummil2 1 3,760 13-03-2025, 10:05 AM
Last Post: benbrooks
  FAAC S800 Single swing Gate not responding robhight 0 3,623 18-11-2024, 11:48 AM
Last Post: robhight
  FAAC problem dennisoates 0 3,234 30-06-2024, 04:40 PM
Last Post: dennisoates
  Intermittent ‘Stop’ command - FAAC 741 Sliding Gate bwel 3 9,062 22-04-2024, 03:21 PM
Last Post: JoeF
  Faac 415 can't reset from manual to operate mode Stephen Q 1 6,909 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 7,601 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 6,390 24-06-2023, 01:06 AM
Last Post: LoneStarCycler

Forum Jump:


Users browsing this thread: 1 Guest(s)