Thread Rating:
  • 41 Vote(s) - 2.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ORNO Video Doorphone -> NICE MC424
#1
Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp


Attached Files
.pdf   OR-VID-VP-2005,2006_PL_manual.pdf (Size: 11.01 MB / Downloads: 866)
Reply
#2
(18-04-2017, 07:57 PM)askoba Wrote: Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp

hi

nice control board has terminal 11-15 for step by step signal from external devices (buttons) . that terminal inputs its only for voltage free signal , before you do any conections make sure that the signal which comes out from 5-6 (video) is voltage free .If isnt thats no problem , you can use 12 vdc relay and send this signal by it .
Best Regards 
Tom 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Nice RB600 - Automatic close fail and opening issues P100D 1 528 30-09-2024, 02:43 PM
Last Post: P100D
  Nice robus not closing Dantay 1 793 27-09-2024, 10:17 AM
Last Post: Aiden Mitton
  Nice Walky on 24v dman99 1 972 12-08-2024, 03:54 PM
Last Post: Aiden Mitton
  Can a Hormann Bisecur learn a code from a Nice ON2E? ? Noghar 1 1,799 17-07-2024, 02:21 PM
Last Post: JoeF
  Nice Era EPMB 3 flashes not recognised by control unit budda 2 1,963 16-07-2024, 08:47 AM
Last Post: Michael
  MC424 PhotoCell Bypass for Constant Power AdamG 0 464 29-06-2024, 02:45 PM
Last Post: AdamG
  nice robus D400 smartphone control YOSH 1 3,063 05-03-2024, 04:45 PM
Last Post: benbrooks
  Nice MC800 Wiring issue Adamzsite 2 3,092 05-03-2024, 04:37 PM
Last Post: Michael
  nice robus troubleshooting tarmongaidon 7 24,627 30-01-2024, 05:19 PM
Last Post: hasanova
  Nice photo sensor issue F210 and MC824H gates won’t operate Tantrum 1 4,426 04-01-2024, 10:06 AM
Last Post: Michael

Forum Jump:


Users browsing this thread: 1 Guest(s)