nice electric gates
|
nice electric gates
|
|
22-03-2014, 11:24 AM
hi guys,
I have a problem with my nice a6 electric gates.have read manual have not got 24 volts on terminals 21 and 22.think transformer is working .please help cheers andy 
04-04-2014, 10:10 AM
These contacts should definitely have 24V AC coming out of them. If you are not reading this low voltage output, I should check your low amp fuse on the board and also check for any burnt out tracks on the rear of the panel. Any water damage to the panel will be recognisable by white residue. If you link out the photocell contacts do the gates start functioning? If its just the accessory power output which has failed, rather than buying a new panel, you could use a separate PSU to power your photocells and other accessories.
(22-03-2014, 11:24 AM)rose.andy Wrote: hi guys, |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Gates not staying open | JimM169 | 1 | 501 |
21-05-2025, 02:55 PM Last Post: Jakedugmore |
|
| Nice Swing Gate Opener | nicenotnice | 0 | 1,486 |
18-03-2025, 06:40 AM Last Post: nicenotnice |
|
| Nice wingo 5400 and MC800 | engrbhadz | 0 | 761 |
18-03-2025, 05:53 AM Last Post: engrbhadz |
|
| Hikvision DS-KD8003-IME1 video intercom to Nice Robus 600 gate motor help | j1000 | 29 | 41,795 |
27-02-2025, 03:08 PM Last Post: P100D |
|
| FAAC gates out of sync | TheDock | 1 | 1,902 |
21-08-2024, 12:21 PM Last Post: TheDock |
|
| Program a 3rd party remote to Nice Robus N600 | P100D | 4 | 4,793 |
13-05-2024, 03:36 PM Last Post: JoeF |
|
| Nice MC824H gate stuck open | Markp80 | 1 | 3,963 |
13-05-2024, 02:32 PM Last Post: Jakedugmore |
|
| Rigel 5 , gates won't open | Nameloc | 4 | 7,276 |
04-05-2024, 12:41 PM Last Post: Alee |
|
| Gates tripped | Phil.c | 3 | 3,623 |
01-05-2024, 09:34 AM Last Post: Phil.c |
|
| Came ZA3 gates stuck open | Ivorwindybottom | 0 | 1,781 |
18-02-2024, 06:29 PM Last Post: Ivorwindybottom |
|
