My swing gates are stuck at 50% open
|
My swing gates are stuck at 50% open
|
25-03-2024, 12:41 AM
Hi my swing gates won't operate and are stuck at 50% open , I learned the CB11 control board and removed the jumper and pressed the L1 button and the photo cells are just flashing and not a sound or movement from the motors on the gates , can you help and point me in the correct direction to fix this issue thanks Joe
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
My swing gates are stuck at 50% open - by jctrotting - 25-03-2024, 12:41 AM
RE: My swing gates are stuck at 50% open - by JoeF - 11-04-2024, 08:11 AM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Sliding gates are opening/closing like someone is going in /out. | gandreja | 3 | 8,646 |
14-04-2020, 01:45 PM Last Post: RyanB |
|
| Liftmaster CB1 gates started to open themselves | telnet123 | 4 | 25,546 |
01-01-2020, 09:43 AM Last Post: pronosoft |
|
| CB1 How to learn the gates | telnet123 | 1 | 15,065 |
30-04-2018, 01:45 PM Last Post: Tim |
|
| Gates dont close after being held open | jaybee | 1 | 11,997 |
18-06-2013, 09:23 AM Last Post: Blakey111 |
|
| liftmaster CB11 hold gate open problem | sparkey | 5 | 30,555 |
13-05-2013, 08:17 AM Last Post: brucekwilles |
|
| Swing Gate Controller | 0 | 8,101 |
19-07-2009, 06:50 PM Last Post: Guest |
||
