Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Proteco Q60 - FH error then close after opening
#1
Hi, I've got a Proteco Q60 dual swing gate controller. I recently had a problem where the power supply was cut to the closing photocell transmitter.   I repaired it today and the LED now goes back to '--' as expected. When I sent a close signal by linking 1-8 for a second, the LED goes to Go and the gate opens/closes as expected. However about 3-4 seconds after the gate fully opens/closes, I see FH appear momentarily on the LED, and then the gate does the reverse action.

I've tried removing all external devices and shorting the basic links (2-8, 4-9, 3-9) and testing manually by touching 1-8. Same issue - so I don't believe it's anything to do with the photocell circuit or any external switches.

Can anybody give me any indications as to what might be causing this error? The manual just says that FH is dual opening/closing photocell interruption or wiring error, but as it happens even when I have jumpers across 4-9 and 3-9 I don't believe that's the issue.

Thanks in advance for your help!

Paul
Reply
#2
Hi,

Hope you are well. We do not tend to deal with Proteco systems, I would recommend getting in touch with them directly - http://proteco-direct.co.uk/support/

- Jamie
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  proteco q60a microcontroller program arashkhan 1 530 17-06-2022, 01:29 PM
Last Post: benbrooks
  Aria 400 - gates keep opening and closing objohnuk 1 1,601 13-04-2022, 11:32 AM
Last Post: JoeF
  Proteco Q60 AR ...Fob wont program Shane1 0 504 12-01-2022, 08:13 PM
Last Post: Shane1
  Came ZLJ24Z - close immediately photocells are clear Enginear1 0 893 29-10-2021, 10:47 PM
Last Post: Enginear1
  Proteco Leader N1 problem Luc Bevers 0 773 22-10-2021, 09:57 AM
Last Post: Luc Bevers
  Gates Opening After Closing tht7 1 6,336 13-10-2021, 04:47 PM
Last Post: gate-keeper
  Proteco gates with photocell problem. Shane1 0 867 09-10-2021, 07:56 PM
Last Post: Shane1
  Proteco Aster 3 ram fault soother 2 2,775 14-07-2021, 11:58 PM
Last Post: soother
  Genius Brain 17 Control Board - External Open/Close Signal rhennessysummit 1 3,232 02-05-2021, 09:00 PM
Last Post: soother
  Thalia P - BAR error devsolo 2 5,375 07-01-2021, 04:05 PM
Last Post: GilbertoMoncada

Forum Jump:


Users browsing this thread: 1 Guest(s)