Thread Rating:
  • 228 Vote(s) - 2.99 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Remotes not working
#1
Exclamation 




Hello all knowledgeable peeps.

So we have a liftmaster gate opener, supplied by Easy gates over 10 years ago. it opens two gates and works manually from the button OK. but all 3 of the remotes have now stopped working.

I have been through and pressed the CH1 button for each of the remotes and waited 30 seconds until the light goes out.

they all have new batteries and now when pressed you can see that they are communicating with he board as the CH1 and CH2 lights are flickering. but no click or gate opening happens.

Trying not be a dumb blonde, but could do with some guidance, as its now getting cold and wet and having to manually click the button is a pain in the proverbial!!
Reply
#2
(19-11-2016, 01:43 PM)Jo Haill Wrote:



Hello all knowledgeable peeps.

So we have a liftmaster gate opener, supplied by Easy gates over 10 years ago. it opens two gates and works manually from the button OK. but all 3 of the remotes have now stopped working.

I have been through and pressed the CH1 button for each of the remotes and waited 30 seconds until the light goes out.

they all have new batteries and now when pressed you can see that they are communicating with he board as the CH1 and CH2 lights are flickering. but no click or gate opening happens.

Trying not be a dumb blonde, but could do with some guidance, as its now getting cold and wet and having to manually click the button is a pain in the proverbial!!

Hi Jo,

If all remotes had stopped working at the same time, this would indicate a failure of the receiver. Do you know which system you purchased from us?
Kindest Regards,

Sav
Tel: 0845 054 5070
Fax: 0845 643 6814


Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Control Unit Not Working mtuk100 0 10,839 10-10-2019, 03:14 PM
Last Post: mtuk100
  CB24 panel stopped working - hot diodes + resistors... Dev 0 2,818 10-04-2017, 08:59 PM
Last Post: Dev
  CB11 control box Intercom release button not working Moreteyne 0 6,243 14-09-2011, 03:14 PM
Last Post: Moreteyne

Forum Jump:


Users browsing this thread: 1 Guest(s)