Thread Rating:
  • 381 Vote(s) - 2.72 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wind problem.....
#11
(11-07-2019, 04:05 PM)Pop Alexandra Wrote:
(09-10-2016, 05:46 PM)frenchconnection67 Wrote: A solution is a lock as you did but you need to set the board with the lock release function ON which makes the motor to force close for a 2 or 3 s to release any pressure of the lock before the normal cycle.
I tried this with 3 seconds and it works just fine. Thanks for the tip.
_______________________________________________________
Alexandra from https://revetementagro.com/produits/garage 
 Hi,

Glad this worked for you Smile

Sam.
Reply
#12
(11-07-2019, 04:05 PM)Pop Alexandra Wrote:
(09-10-2016, 05:46 PM)frenchconnection67 Wrote: A solution is a lock as you did but you need to set the board with the lock release function ON which makes the motor to force close for a 2 or 3 s to release any pressure of the lock before the normal cycle.
I tried this with 3 seconds and it works just fine. Thanks for the tip.
_______________________________________________________
Alexandra from https://revetementagro.com/produits/garage 
That is great to hear.
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)