Thread Rating:
  • 11 Vote(s) - 3.91 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BFT Thalia no power on accessory ports (50, 51)
#1
I am trying to draw port from ports 50, 51 which should provide 24V, however there is none. I checked all the fuses, and they all seem to be good. What else can I check?


Attached Files Image(s)
   
Reply
#2
(20-08-2024, 06:24 PM)tjomk Wrote: I am trying to draw port from ports 50, 51 which should provide 24V, however there is none. I checked all the fuses, and they all seem to be good. What else can I check?

Hi,

If you have metered for voltage and are still not getting a reading between the two contacts then it sounds as if the 24V outputs must be faulty.

Jake
Reply
#3
You will possibly find that they energise when the gates are in operation and shut off again when they stop. They should not do that as terminal 52 is the one that is set to safe but mine was exactly the same and I had to take a separate feed for my ground loop, which needed a permanent supply.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Exclamation Thalia Light btl2 new gate openers only open gate Libwala 2 1,227 03-02-2025, 12:24 PM
Last Post: JoeF
  Accessory Power Caesium 5 16,745 08-05-2024, 09:02 AM
Last Post: JoeF
  Thalia - Photocell Close J to the D 1 2,327 19-01-2024, 09:54 AM
Last Post: Michael
  BFT Thalia ‘Hold Open’ hehasmoments 5 8,711 24-08-2023, 01:38 PM
Last Post: JoeF
  Thalia P - Wireless control board module mathewnorris22 1 4,490 02-03-2023, 03:17 PM
Last Post: SamA
  thalia error code 3h 35/37/38 detritus 1 4,300 05-01-2023, 11:54 AM
Last Post: SamA
  BFT photocell low power/no power kmeand 2 8,591 03-08-2022, 01:47 PM
Last Post: Michael
  BFT Thalia button djbananas 3 6,834 19-04-2022, 09:14 AM
Last Post: JoeF
  BFT Thalia GSM gate opener SunnyB1 1 4,671 07-03-2022, 10:58 AM
Last Post: JamieF
  Lux/Thalia P ersl error Dava12 0 3,556 13-12-2021, 09:35 PM
Last Post: Dava12

Forum Jump:


Users browsing this thread: 1 Guest(s)