13-06-2011, 09:37 PM
Just as a follow-up. I have now had a phone conversation with Mark, and the advice is that the DIAX maglock wiring should be used as it is supplied as far as the junction box, with the appropriate 24v jumper in place, but that only the + and - outlets should be used thereafter to connect to the control panel. The other switching outlets can simply be ignored.
As to mounting onto swing gates, a Z mounting plate is indeed required for the armature, but the lock can be screwed directly onto the first gate leaf to close. Self-evidently this requires a delay between the leafs - and it won't look very pretty - but at least it will be secure...
This may help others as it has me!
As to mounting onto swing gates, a Z mounting plate is indeed required for the armature, but the lock can be screwed directly onto the first gate leaf to close. Self-evidently this requires a delay between the leafs - and it won't look very pretty - but at least it will be secure...
This may help others as it has me!