+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Q60A/R error. Showing "_ " (/showthread.php?tid=5492)
Q60A/R error. Showing "_ " - Jonas Pistolas - 02-11-2017
Hi there,
I found water inside the my proteco automation central case.
One fuse have blown. I've changed it but now show me the following error:
On stand by it only shows "_ ", and when cycling throuh the button A (the only button that does anything) it is showing
the following.
Q60 error video
Ty in advance for an help!
RE: Q60A/R error. Showing "_ " - Automatic-TC - 02-11-2017
(02-11-2017, 08:25 PM)Jonas Pistolas Wrote: Hi there,
I found water inside the my proteco automation central case.
One fuse have blown. I've changed it but now show me the following error:
On stand by it only shows "_ ", and when cycling throuh the button A (the only button that does anything) it is showing
the following.
Q60 error video
Ty in advance for an help!
hi
You should at the begining take the central to the house and dry it .
which fuse blow up ? high voltage or low
RE: Q60A/R error. Showing "_ " - Jonas Pistolas - 03-11-2017
The 5A fuse was the one that had blow up.
I already dried everything very well, but with no sucess.. ?
RE: Q60A/R error. Showing "_ " - Automatic-TC - 03-11-2017
(03-11-2017, 05:13 AM)Jonas Pistolas Wrote: The 5A fuse was the one that had blow up.hi
I already dried everything very well, but with no sucess.. ?
http://manuals.easygates.co.uk/PDF/misc/mygate.pdf
you should check all accessories photo,receiver etc ...... with manual you can try to programing once again ..
RE: Q60A/R error. Showing "_ " - Jonas Pistolas - 03-11-2017
Thank you for the manual.. i already got it, and none of the central error messages are described on the manual. I'm not able to do any programming, as a reset.
I already disconnected everything, and nothing changes...
I was wondering if there is a way to force the central to a reset...
Bests,
(03-11-2017, 07:58 AM)Automatic-TC Wrote:(03-11-2017, 05:13 AM)Jonas Pistolas Wrote: The 5A fuse was the one that had blow up.hi
I already dried everything very well, but with no sucess.. ?
http://manuals.easygates.co.uk/PDF/misc/mygate.pdf
you should check all accessories photo,receiver etc ...... with manual you can try to programing once again ..