+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: Frog - ZA3: gates won't open (/showthread.php?tid=5315)
Frog - ZA3: gates won't open - BarryD - 15-06-2016
I've installed the Came frog series gates and they won't open.
I've no wire connected to the controller pcb only shorted pins 1->2 and 2->C1
and then I briefly short pin 2 to pin 3 to try and open the gates. The relays start clicking but the gates don't move. The gates close properly by shorting pins 2->4. I have swapped the motor wiring and shorted 2->4 and the gates open so this looks like a pcb issue. Has anyone else seen this? Any ideas how to debug the issue?