You are not logged in or registered. Please login or register to use the full functionality of this board...


Post Reply 
 
Thread Rating:
  • 10 Votes - 2.4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommend This Post:
Came za4 and magloc
12-09-2017, 01:39 PM
Post: #1
Came za4 and magloc
Hi all !
Just got a magloc for cameZA4 but there is no loc terminals.
Have a 240/12 dc transformer and a tic relay board but can't suss out the NC/NO side of things
Help !!!!
Thanks in advance
Find all posts by this user
Quote this message in a reply
15-09-2017, 10:10 AM
Post: #2
RE: Came za4 and magloc
Hi,

On mag locks, you always use the NC terminals, this is because you want power permanently to the lock until you trigger the gates which will then change the state to normally open. This will remove the power temporarily to allow the gates to unlock.

(12-09-2017 01:39 PM)Stocky Wrote:  Hi all !
Just got a magloc for cameZA4 but there is no loc terminals.
Have a 240/12 dc transformer and a tic relay board but can't suss out the NC/NO side of things
Help !!!!
Thanks in advance

Kindest Regards,

Sav
Tel: 0845 054 5070
Fax: 0845 643 6814
Visit this user's website Find all posts by this user
Quote this message in a reply
15-09-2017, 11:58 AM
Post: #3
RE: Came za4 and magloc
Thanks for reply, have just received a diagram from came .
??
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: