Thread Rating:
  • 169 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rigel 4 and Clonix not receiving signals
#1
We have gates controlled by a Rigel 4 unit with a Clonix radio receiver.
They have been very reliable for about 15 years but now they don't seem to be receiving any signals from the transmitters.
The LEDs on the main PCB are lit up correctly as described by the manual and all 3 fuses appear intact.
I wondered if the receiver has lost it's programming but when I pressed the microswitch on the Clonix board the LED on this PCB doesn't light up at all so I'm now of the opinion that the Clonix unit is the problem.

Does anyone have any ideas what else I can try to troubleshoot the problem ?

Thanks,

Paul
Reply


Messages In This Thread
Rigel 4 and Clonix not receiving signals - by apbran - 04-03-2017, 02:12 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Rigel 5 , gates won't open Nameloc 2 3,845 23-04-2024, 08:35 AM
Last Post: JoeF
  BFT Rigel 6 stevew 3 1,609 29-08-2023, 08:39 AM
Last Post: Michael
  Rigel 5 - second keypad stopped working HarefieldHse 1 1,630 03-07-2023, 08:48 AM
Last Post: Michael
  Strange gate operation Rigel controller Philreghse 0 6,704 10-06-2019, 09:18 AM
Last Post: Philreghse
  BFT Rigel LUX FC actuators erratic Berrystead 0 5,171 31-08-2016, 08:19 PM
Last Post: Berrystead
  BFT Rigel 5 graham 2 13,537 20-05-2013, 01:55 PM
Last Post: graham
  BFT Rigel 5 Remote sync Nicks 1 11,975 01-03-2013, 02:15 PM
Last Post: Mark

Forum Jump:


Users browsing this thread: 1 Guest(s)