Thread Rating:
  • 3 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Genius JA592 issue
#1
Hi all, hopefully somebody here can help me out.

so, recently this gate board has been giving a few issues, wheras it doesnt close fully.

I know to press the f button for 3 seconds to re program the sequence of open/close, however when i press this button, both gates open, it does not seem to be giving me the option of holding for 3 seconds. the moment i press button, both gates move open at the same time

I am sure this used to, as i reprogrammed it recently with new motors.

if the board is at fault, i have no problem replacing it, but would like to see if anybody here had a similar issue before.

thanks a lot in advance

edit: ds1 switch positions are
1 off
2 off
3 off
4 off
5 off
6 off
7 off
8 on
9 off
10 off
11 on
12 off
Reply
#2
Hi

Thank you for your enquiry.

Could you please confirm if there are any accessories wired into the panel, if so what accessories have you got wired in at the moment where the fault is still present. Sometimes we tend to find that it is an accessory throwing up strange faults on these control boards even though the accessory itself may behaving correctly.

I would suggest if you have got anything wired in to remove it and link out your safety connections to ensure you can operate the gate fully open and fully closed.

Many thanks

Ben
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply
#3
Hi, thanks for your reply.
the only things extra that are connected are the photocells and keypad. 

so i should disconnect these and see then if the board is working correctly?
Reply
#4
Hi,

That is correct. Just leave the motors connected to the board.

Regards
Easygates Ltd
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Control Unit CLB202 Gate leaf learning issue Kaala1 0 4,016 25-05-2023, 03:55 PM
Last Post: Kaala1
  BFT IGEA BT issue warren5 1 3,347 13-04-2022, 11:49 AM
Last Post: Michael
  Genius Brain 17 Control Board - External Open/Close Signal rhennessysummit 1 5,778 02-05-2021, 09:00 PM
Last Post: soother
  Beninca BOB21m Photo cell issue Rossm1987 1 5,091 02-05-2021, 12:39 PM
Last Post: Rossm1987
  BFT C130 Photocell Issue labbetts 0 4,271 25-01-2020, 05:01 PM
Last Post: labbetts
  BFT DEIMOS BT Programming issue dawoodejaz@hotmail.com 0 4,787 28-11-2019, 12:11 AM
Last Post: dawoodejaz@hotmail.com
  Genius Gate System Problem grasshopper 1 11,810 01-07-2019, 09:39 AM
Last Post: JoeF
  Genius JA574 problem jeeter 0 4,998 02-05-2019, 01:13 PM
Last Post: jeeter
  Strange gate opening issue (NICE) FrNiscars 3 24,353 09-11-2018, 09:48 AM
Last Post: RyanB
  Adjusting a Genius Euro BAT 400 DX? robdav 2 10,451 07-11-2018, 03:49 PM
Last Post: robdav

Forum Jump:


Users browsing this thread: 1 Guest(s)