Thread Rating:
  • 8 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BFT BT A40 Dual Arm
#1
Hello,

Gate 1 responds and opens (connections on control panel 10/11. Gate 2 will not respond (connections 14/15). On Thalia Control panel.
If I change the wiring connections from one motor to the other - on the board - then motor 2 will work, but motor 1 won't. 
So the wiring is working along the run between the two arms but both arms will not open together.
Can you help?
Thank you
Reply
#2
Hello,

Any follow up on this?
Thanks
Reply
#3
Hi,

This sounds to me like a possible faulty Motor output 1, Have measured the voltage from motor terminals 1?

Regards 
Mike
Easygates
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply
#4
Thank you for your reply Michael.
Both sides have just started working, in a haphazard sort of way and there is an error code 38 showing!
Will motor output 1 still require reading and how best would I do that?
Thanks again.
Reply
#5
(07-02-2022, 04:08 PM)teegee Wrote: Thank you for your reply Michael.
Both sides have just started working, in a haphazard sort of way and there is an error code 38 showing!
Will motor output 1 still require reading and how best would I do that?
Thanks again.

Hi,

What control panel are you using? If you can let me know which panel you have, I will be able to provide you with the reason for this error code showing. 

Kind regards
-Jamie
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)