Thread Rating:
  • 4 Vote(s) - 2.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Beninca sliding gate.
#1
Hi everybody,i am not a company just a private owner, I have a beninca sliding gate with a CP.BULL 8 OM control panel that i have just replaced. The original panel stopped working and upon inspection found that a slug had found it's way in and shorted out the unit. After fitting the panel i after some difficulty but managed to program it to my hand controller. the gate now works fine traversing back and forward with no problem.I thought!!, after closing and after about 30 seconds the gate opens on it's own. Any ideas?.
Reply
#2
Perhaps due to a short circuit, the system stopped working correctly.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Gibidi gate opener. Add a wired switch. Eagle_man 1 9,324 30-11-2021, 01:23 PM
Last Post: JamieF
  Hello Looking for gate control help everettc4 1 6,417 05-02-2021, 01:12 PM
Last Post: JamieF
  GIBIDI gate motor closing problem davidcunningham 0 7,918 26-04-2019, 07:46 PM
Last Post: davidcunningham
  Inherited GiBiDi Gate Shuggy73 2 12,628 13-04-2018, 05:18 PM
Last Post: Shuggy73
Cool Hello :) Gate/Barrier Engineer MrDiagnostics 0 7,746 29-04-2017, 09:48 AM
Last Post: MrDiagnostics
  Mhouse Swing gate rmgsecurity Sri Lanka 0 6,978 12-11-2016, 03:00 AM
Last Post: rmgsecurity Sri Lanka
  BFT electric gate Er 35 Chantal 0 7,082 28-11-2015, 07:57 PM
Last Post: Chantal
  Hello. Newbie Q re self fitting gate openers palmiye 4 17,529 28-04-2015, 08:51 AM
Last Post: palmiye

Forum Jump:


Users browsing this thread: 1 Guest(s)