Thread Rating:
  • 8 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Came ZLJ24
#1
I am wanting to connect my GSM intercom to the ZLJ24 panel, instructions given are to wire to the Com port and the No port, unable to find these in the panel, 5 wires from controller , Open Pedestrian, Common, Open, AC/+VE  and  AC/GND. Any information would be VERY much appreciated,
Reply
#2
Hi,

I hope you are well. Please see the terminal descriptions below.

Terminals 3 - N/O
Terminals 1 Com

You will need to wire from the relay output on the intercom to the N/O and COM on the ZLJ24 panel. You can see this shown in the manual which i have linked below for you. You will need to refer to page 6/32 on the PDF. Note this will be using the 'Key selector and/or opening button (N.O contact)'.
https://manuals.easygates.co.uk/PDF/misc/ZLJ24.pdf

I hope this has helped.

Kind regards
- Jamie
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Help with intercom to Came ZLJ24 paulaj 0 4,989 15-06-2020, 06:27 PM
Last Post: paulaj
  CAME ZLJ24 panel - Open gate indicator-light Domcov 1 16,410 02-05-2018, 06:18 PM
Last Post: Automatic-TC

Forum Jump:


Users browsing this thread: 1 Guest(s)