Thread Rating:
  • 534 Vote(s) - 2.86 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Manual release key
#1
Hi there, first post so here goes!

I need to get a manual release key for my electric gates but cannot identify the make. The release key hole is a hollow cylinder with two ridges inside. I attach some pics which may assist. Could anyone tell me what I'm looking for and where I might source it?

Many thanks

Gerry

               
Reply
#2
Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl
Reply
#3
Hi Carl,

That's great - I'll measure the diameter and get back to you.

Cheers and thank you

Gerry

Home IQ Wrote:Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl
Reply
#4
Hi Carl

The diameter of the hole on the gate is 15mm.

I look forward to hearing from you.

Many thanks

Gerry


Gerryburn Wrote:Hi Carl,

That's great - I'll measure the diameter and get back to you.

Cheers and thank you

Gerry

Home IQ Wrote:Hi Gerry, looks very similar to the Proteco make of gground motor, i do have some release keys in the factory, if you could measure the diameter of the hole to double check the keys i have will fit?

let me know, many thanks

carl
Reply
#5
Hi Gerry,

Thats the size of my release levers i have, PM me your address and i will send you one,

thanks

Carl
Reply
#6
For you information Gerry
The releases and motors and releases you posted are the saimatic sub motors
as seen here
http://www.theelectricgateshop.co.uk/lat...=&offset=0

replaced 2 of these motors recently
Makers and installers of fine gates for over 60years
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Liftmaster CB1 / SCS300K - left arm only engages after release then reengage telnet123 2 2,913 10-10-2023, 09:28 AM
Last Post: Matt Turner
  Control panel PSB 2000 who makes this ? Manual needed !! BarkerandGeary 6 33,100 07-03-2020, 10:53 AM
Last Post: Gate-boy
  manual operation wont work brian moffett 1 9,195 15-10-2015, 09:04 AM
Last Post: Dino
  User manual automatic gate MH848 2 17,098 24-11-2011, 02:15 PM
Last Post: MH848

Forum Jump:


Users browsing this thread: 1 Guest(s)