Thread Rating:
  • 7 Vote(s) - 2.57 Average
  • 1
  • 2
  • 3
  • 4
  • 5
nice mca424 board or motor fault
#1
I have nice wingo kit with mca2 board and 920mm leafs model 3524.
After a power loss my swing gates dont fully close anymore. 
The last leaf to close remains open at 70% of travel. I tried a reset / recalibration without success.

I have checked both motors (and wires) and they seem to have the same resistance and current draw while working.
Checked the gates without motors engaged and they are not blocked in any way.


Im thinkining board fault or maybe the motors have worn brushes ?

Anybody experienced this ? Even with sensitivity at level 5 they can be blocked with one finger while closing.
Level 6 (all leds off) is usable at the moment.

thanks
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  nice robus D400 smartphone control YOSH 1 528 05-03-2024, 04:45 PM
Last Post: benbrooks
  Nice MC800 Wiring issue Adamzsite 2 553 05-03-2024, 04:37 PM
Last Post: Michael
  nice robus troubleshooting tarmongaidon 7 16,114 30-01-2024, 05:19 PM
Last Post: hasanova
  Nice photo sensor issue F210 and MC824H gates won’t operate Tantrum 1 1,524 04-01-2024, 10:06 AM
Last Post: Michael
  Nice Robus RBA3c Wifi Relay Switch Wiring denis 1 2,006 01-11-2023, 09:45 AM
Last Post: Michael
  NICE MC800 Factory Reset bg148 5 2,886 12-10-2023, 01:11 PM
Last Post: JoeF
  Nice MCA1 stuck open after stop command Khooke 1 2,330 25-09-2023, 10:47 AM
Last Post: Michael
  Nice transmitters - compatibility Noghar 6 6,590 10-10-2022, 10:02 AM
Last Post: benbrooks
  NICE MC82H - connecting maglock grangerd 3 4,834 10-10-2022, 09:40 AM
Last Post: SamA
  Nice Robus Don't Auto Close!!!! Ali_1982 1 4,301 03-08-2022, 02:23 PM
Last Post: Michael

Forum Jump:


Users browsing this thread: 1 Guest(s)