Thread Rating:
  • 8 Vote(s) - 2.88 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thalia P - BAR error
#1
Hi All,

We have a BFT thalia p gate, with swing gate doors.

We have a BAR error displayed on the screen, can someone please help on how to reset this?
The gate is currently in an open position and will not close.

Thanks
Reply
#2
(21-12-2020, 11:54 AM)devsolo Wrote: Hi All,

We have a BFT thalia p gate, with swing gate doors.

We have a BAR error displayed on the screen, can someone please help on how to reset this?
The gate is currently in an open position and will not close.

Thanks

Hi

The BAR error is generated by the safety edges, if you have wireless edges you may be get away with changing the batteries in the transmitters. Otherwise, you will require an engineer to fault find, potentially a faulty edge or cabling issue.

Electric Gates Berkshire - www.thegateco.co.uk
The Gate Company
www.thegateco.co.uk
Reply
#3
Gracias de vdd que me ha servido mucho, tenía el mismo error bar
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Proteco Advantage (Q60A) Error Code "03" CLAUDIOTX 3 17,856 26-09-2023, 05:32 AM
Last Post: max666
  Proteco Q60 - FH error then close after opening Needlerp 1 2,312 24-06-2022, 09:54 AM
Last Post: JamieF
  Deimos BT 400/600 error codes orange 0 3,860 07-12-2020, 09:36 AM
Last Post: orange
  Fav sliding gate error code plus other Adam67 0 8,974 02-09-2020, 07:06 PM
Last Post: Adam67
  Re: Error 30 tony.jay8 2 11,002 10-05-2018, 11:17 PM
Last Post: tony.jay8
  BFT Error 35 & 37 Not opening fully - SOLVED razer raz 4 39,692 14-11-2017, 04:02 PM
Last Post: razer raz
  Q60A/R error. Showing "_ " Jonas Pistolas 4 18,665 03-11-2017, 10:19 AM
Last Post: Jonas Pistolas
Question Proteco q80s Error 44 Cphats 1 9,931 13-08-2017, 11:15 PM
Last Post: gerardo
  BFT Deimos BT Error Codes rajesh 1 16,960 05-06-2017, 11:07 AM
Last Post: Sav
Question Proteco q80s - Constant ST - constant open signal error Cphats 0 6,084 05-07-2016, 10:23 PM
Last Post: Cphats

Forum Jump:


Users browsing this thread: 1 Guest(s)