Thread Rating:
  • 8 Vote(s) - 2.63 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Faac E145s help please
#1
Hello,

When I power up my cb the display shows the following:
"bo" with two blue led's for 5 seconds.
It then changes to blank screen with two blue led's and one red.

Nothing else appears at all.
Can anyone advise on this? Is it possible to do a reset?

Could the board not have any software on it and do you know if it's possible to have faac look at this? It's a new system which I have just installed and can't figure it out.

Thank you for your help.


Attached Files Image(s)
       
Reply
#2
(23-08-2020, 08:51 AM)pm9020 Wrote: Hello,

When I power up my cb the display shows the following:
"bo" with two blue led's for 5 seconds.
It then changes to blank screen with two blue led's and one red.

Nothing else appears at all.
Can anyone advise on this? Is it possible to do a reset?

Could the board not have any software on it and do you know if it's possible to have faac look at this? It's a new system which I have just installed and can't figure it out.

Thank you for your help.
Reply
#3
I have exactly the same problem. Got the board replaced but it’s doing exactly the same thing. bo and 2 blues and red error light.
Did you get a solution?
There must be a way to reset the software?
Reply
#4
One of the topics is not getting loaded in the help file;
It shows: 404: File or Directory not found error?

Is there anything i can do to check whats wrong?

regards,
Raghu
Reply
#5
you need to wire the connectors first, it cant see any safetys etc.
then you can go through programming using the 'f' key
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 415 can't reset from manual to operate mode Stephen Q 1 1,151 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 2,214 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 2,905 24-06-2023, 01:06 AM
Last Post: LoneStarCycler
  FAAC 400 cbac LN 104202 obey gates 1 7,386 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 5,287 14-11-2022, 12:03 PM
Last Post: benbrooks
  E145s - error code 5 during setup pete.23 2 9,901 12-08-2022, 08:13 AM
Last Post: SamA
  FAAC sensors and Beninca R16E motor Beachcomber 7 10,644 20-07-2022, 09:50 AM
Last Post: SamA
  Faac 455 beginner help please Ghutson70@gmail.com 2 8,410 30-05-2022, 09:12 AM
Last Post: SamA
  Faac C721 trips mains when connecting transformer Gatehelp 3 6,763 24-05-2022, 08:36 AM
Last Post: SamA
  Faac Ufo Rail manual to auto mode TibiHu 1 4,925 07-03-2022, 11:03 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)