Thread Rating:
  • 8 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAAC Gate Issue
#1
Hello All-

I have a FAAC E124 (or slightly earlier) controller along with underground FAAC S800 gate motors.
The gate currently remains in an open state. I had an engineer visit and he couldn't diagnose the problem either.

A summary of the problem:

1. Both sides of the gate refuse to close giving a 04 code on the display.
2. When I run the setup the gates open and close fine.
3. When the gate goes into normal operation, it just remains open.
4. The gate sensors appear to be fine (I hear the click sound when the infrared beam is broken).

Hoping someone can shed some light.

Thanks in advance.

Asif.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Faac 415 can't reset from manual to operate mode Stephen Q 1 1,167 18-03-2024, 01:20 PM
Last Post: RXH
  Faac 455d Grantplant 1 2,232 13-11-2023, 11:58 AM
Last Post: Aiden Mitton
  FAAC 740 limited travel LoneStarCycler 0 2,915 24-06-2023, 01:06 AM
Last Post: LoneStarCycler
  FAAC 400 cbac LN 104202 obey gates 1 7,397 21-11-2022, 09:54 AM
Last Post: SamA
  FAAC gates help - code change from previous owners trekkerglenn 3 5,294 14-11-2022, 12:03 PM
Last Post: benbrooks
  Gate continues trying to open tjtj6554 1 3,047 20-09-2022, 08:02 AM
Last Post: SamA
  FAAC sensors and Beninca R16E motor Beachcomber 7 10,652 20-07-2022, 09:50 AM
Last Post: SamA
  Faac 455 beginner help please Ghutson70@gmail.com 2 8,424 30-05-2022, 09:12 AM
Last Post: SamA
  Faac C721 trips mains when connecting transformer Gatehelp 3 6,765 24-05-2022, 08:36 AM
Last Post: SamA
  Faac Ufo Rail manual to auto mode TibiHu 1 4,927 07-03-2022, 11:03 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)