Thread Rating:
  • 6 Vote(s) - 1.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rigel 5 , gates won't open
#1
Hi
I wonder if anybody out there has any idea what could be my problem?
I have two leaf gates controlled by hydrolic rams and a Rigel5 controller.
A fuse tripped on the mains and when it was flicked back the gates didn't work.
The board was dead until I replaced a blown fuse on the Rigel5 board f1 the one nearest where the mains comes in, the other fuse f2 was ok.
Now the board has power the led lights and the display is active.
When I press the button in the house or press the remote to close the gates they still don't work, however the solinoid k7 clicks and strE is displayed on the LCD.
Any help would be greatly appreciated 
Cheers
Alex
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Came ZA3 gates stuck open Ivorwindybottom 0 258 18-02-2024, 06:29 PM
Last Post: Ivorwindybottom
  Electric Gates with AllMatic BIOS2 Unit antsnaith 3 1,201 31-01-2024, 08:22 AM
Last Post: patronsecurity
  Came gates za3p Webby 4 8,820 07-01-2024, 07:11 PM
Last Post: Simon NW
  Disable Open hold On NICE NC824 paul@blxnetworks.co.uk 4 1,671 02-10-2023, 09:20 AM
Last Post: benbrooks
  BFT Rigel 6 stevew 3 1,477 29-08-2023, 08:39 AM
Last Post: Michael
  Nice Gates not closing StuL 1 1,349 24-08-2023, 01:34 PM
Last Post: JoeF
  Gates Opening After Closing tht7 2 9,458 30-07-2023, 12:30 PM
Last Post: lcpbarbosa
  Holding the Gate Open mgb 1 3,468 11-07-2023, 01:35 PM
Last Post: JoeF
  Rigel 5 - second keypad stopped working HarefieldHse 1 1,539 03-07-2023, 08:48 AM
Last Post: Michael
  Came gates stuck open. Ring8180 7 16,652 23-02-2023, 01:08 PM
Last Post: SamA

Forum Jump:


Users browsing this thread: 1 Guest(s)