Thread Rating:
  • 3 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mag-lock not activating after close
#1
Hi all,

I've got a Toona 4 system with MC284H control box.

I had to re-mount the static end of the actuators and so decided to run another automatic calibration routine to detect the end-stop positions...I then manually set the leaf-overlap and open positions according to the manual.

Previously, all worked well, and a magnetic lock activated after close to lock the leaves in position.

After running the calibration routine again, the mag-lock no longer activates after close.

I checked that the output is set to magnetic lock (and not courtesy light) and confirmed that it is indeed set to magnetic lock function.

Do I somewhere have to tell the control board to activate the magnetic lock? I can't find any reference to this in the manual.

Thanks, Ben
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Nice Robus Don't Auto Close!!!! Ali_1982 1 4,299 03-08-2022, 02:23 PM
Last Post: Michael
  Auto close and hold open kensuth 1 4,337 14-03-2022, 11:49 AM
Last Post: JoeF
  Recommended lock for EL100 interface mrsgoggins 5 7,479 28-06-2021, 09:46 AM
Last Post: JamieF
  NIce Aria 400 unable to program gate open/close Telboy 2 11,264 13-01-2020, 03:33 PM
Last Post: Telboy
  Nice Remote - Lock out doctorrogeaton 1 9,014 18-05-2019, 08:39 AM
Last Post: SamA
  Magnetic Lock to NiceHome Aria papekani 3 13,106 20-03-2019, 11:30 AM
Last Post: JoeF
  MC424 - close automatically once open maaarek 3 23,565 03-12-2017, 10:35 AM
Last Post: Automatic-TC
  Gates open as soon as they close Craigp 4 75,813 08-01-2017, 05:04 PM
Last Post: Craigp

Forum Jump:


Users browsing this thread: 1 Guest(s)