Thread Rating:
  • 18 Vote(s) - 2.94 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Faac 770 455D Gates Auto closing
#1
Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.
Reply
#2
(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.


Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.
EasyGates.co.uk - EasyGates Ltd
 
EasyGates Direct - Trade only accounts.

Smart and Secure Center - Smart Home Products
Reply
#3
(15-04-2019, 09:35 AM)SamA Wrote:
(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.


Hi,

Are the three diagnosis lines horizontal or vertical?

Sam.

Hi,

3 are horizontal.

Thanks

Fergal
Reply
#4
(14-04-2019, 12:15 AM)framsbottom Wrote: Hi,
I have Faac 770 230v newly installed with 1 set of sensor on the piers. 
I have recently completed wiring same up and have progressed to the Learning process which is completed. I have installed a switch beside the intercom inside and it wired up. 
In have followed the advanced or complete learning on the gates which has worked fine and exited same with pressing F. 
Status on the 2 digit display to the left now shows 3 lines.

Problem is the Gates won't auto close. 

I'm tearing my hair out here. Any help welcome.
Reply
#5
Sound like your in semi auto logic Make sure LO is set to A
Reply
#6
(22-04-2020, 10:54 PM)Luke Scott Wrote: Sound like your in semi auto logic Make sure LO is set to A
Reply
#7
(23-04-2020, 08:54 AM)framsbottom Wrote:
(22-04-2020, 10:54 PM)Luke Scott Wrote: Sound like your in semi auto logic Make sure LO is set to A
Yes.I eventually figured same. Thanks for the reply.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Came ZA3 gates stuck open Ivorwindybottom 0 260 18-02-2024, 06:29 PM
Last Post: Ivorwindybottom
  Faac 452 pcb board benner91 2 1,586 09-02-2024, 06:13 PM
Last Post: benner91
  Electric Gates with AllMatic BIOS2 Unit antsnaith 3 1,209 31-01-2024, 08:22 AM
Last Post: patronsecurity
  Faac photocell stopped working Zeb Gulickx 2 844 28-01-2024, 12:56 PM
Last Post: Zeb Gulickx
  Came gates za3p Webby 4 8,822 07-01-2024, 07:11 PM
Last Post: Simon NW
  FAAC E124 fault 05 allan@amtas.com.au 0 700 14-10-2023, 12:37 PM
Last Post: allan@amtas.com.au
  Nice Gates not closing StuL 1 1,351 24-08-2023, 01:34 PM
Last Post: JoeF
  Gates Opening After Closing tht7 2 9,462 30-07-2023, 12:30 PM
Last Post: lcpbarbosa
  LIFE AC4 Closing Issues dilbertdog 0 650 29-07-2023, 02:59 PM
Last Post: dilbertdog
  FAAC 740 Sliding gate Just closes or Stops Paul L 1 3,764 03-07-2023, 08:54 AM
Last Post: Michael

Forum Jump:


Users browsing this thread: 1 Guest(s)