Thread Rating:
  • 177 Vote(s) - 2.97 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BFT Error 35 & 37 Not opening fully - SOLVED
#1
Hi,

HAve a DEIMOS ULTRA BT A600. Gate wont open fully.

Error 35 & 37 popping up - cant find out what it is.

Also a photocell has been hit recently ( can here relay working and gate working as expected when the cell is covered)

Any advice welcome!
Reply
#2
(12-11-2017, 05:37 PM)razer raz Wrote: Hi,

HAve a DEIMOS ULTRA BT A600. Gate wont open fully.

Error 35 & 37 popping up - cant find out what it is.

Also a photocell has been hit recently ( can here relay working and gate working as expected when the cell is covered)

Any advice welcome!

hi

are you sure that was error 35/37 or Er 3H ?

did you try to open the gates manualy ?
Best Regards 
Tom 
Automatic-TC
Reply
#3
Hi,

Please see below the error codes.
Error code 35 - Opening obstacle motor 1
Error code 37 - Slowdown opening obstacle detection motor 1
I would check that there is nothing which could be causing an obstacle and check that the gate moves freely without any resistance spots, hope this helps.
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply
#4
(14-11-2017, 10:32 AM)TimK Wrote: Hi,

Please see below the error codes.
Error code 35 - Opening obstacle motor 1
Error code 37 - Slowdown opening obstacle detection motor 1
I would check that there is nothing which could be causing an obstacle and check that the gate moves freely without any resistance spots, hope this helps.

Thanks for the codes Smile

Ill have a look to see if anything is causing resistance ( this does corroborate with the display showing a higher load on the motor than the other leafs motor - which isn't presenting any error codes either)
Reply
#5
All sorted gents.

Found debris underneath the guide rail, stopping the guide wheels passing by.

Once removed, gate runs smoothly!

Cheers!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Proteco Advantage (Q60A) Error Code "03" CLAUDIOTX 3 17,854 26-09-2023, 05:32 AM
Last Post: max666
  Gates Opening After Closing tht7 2 9,457 30-07-2023, 12:30 PM
Last Post: lcpbarbosa
  Robus 600 not closing fully All Well 11 8,840 03-08-2022, 02:42 PM
Last Post: benbrooks
  Proteco Q60 - FH error then close after opening Needlerp 1 2,310 24-06-2022, 09:54 AM
Last Post: JamieF
  Aria 400 - gates keep opening and closing objohnuk 1 4,118 13-04-2022, 11:32 AM
Last Post: JoeF
  Thalia P - BAR error devsolo 2 9,353 07-01-2021, 04:05 PM
Last Post: GilbertoMoncada
  Deimos BT 400/600 error codes orange 0 3,860 07-12-2020, 09:36 AM
Last Post: orange
  Fav sliding gate error code plus other Adam67 0 8,973 02-09-2020, 07:06 PM
Last Post: Adam67
  Strange gate opening issue (NICE) FrNiscars 3 23,006 09-11-2018, 09:48 AM
Last Post: RyanB
  Nice a60 opening issue raven2k1 1 7,593 09-09-2018, 05:17 PM
Last Post: Automatic-TC

Forum Jump:


Users browsing this thread: 1 Guest(s)