Thread Rating:
  • 132 Vote(s) - 3.08 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CB124EV Problem
#1
Hi I've fitted a new CB124EV board to replace an old CB24.
the problem I have is when setting up all is good both gates go through the learn cycles but after when I press the button to open the gates only motor1 gate opens.

Dill switch is set to two gates

I've even swapped the wiring from motor1 to motor2 and motor2 to motor1 to prove the motors, still only the gate in motor1 opens

any help would be greatly appreciated
Reply
#2
hi

is the motors having micro switches ?

Open the gate manually at halfway and press the remote control
Best RegardsĀ 
TomĀ 
Automatic-TC
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Photocell Problem marcoos_1 4 18,891 04-01-2024, 10:23 AM
Last Post: JoeF
  Master to slave remote problem Dingerb 0 1,570 24-12-2021, 01:26 PM
Last Post: Dingerb
  Proteco Leader N1 problem Luc Bevers 0 2,023 22-10-2021, 09:57 AM
Last Post: Luc Bevers
  Proteco gates with photocell problem. Shane1 0 2,149 09-10-2021, 07:56 PM
Last Post: Shane1
  BFT ULTRA BT A50 problem cayres 0 2,125 13-04-2021, 08:19 AM
Last Post: cayres
  CB124EV flashing learn light won't go out rodean 0 3,620 07-09-2020, 09:06 PM
Last Post: rodean
  Beninca RI 6E Problem leonardermo 0 4,337 29-04-2020, 08:45 PM
Last Post: leonardermo
  Genius Gate System Problem grasshopper 1 10,780 01-07-2019, 09:39 AM
Last Post: JoeF
  Genius JA574 problem jeeter 0 4,592 02-05-2019, 01:13 PM
Last Post: jeeter
  Q60A/R motor problem Johnmc 12 44,140 17-01-2017, 08:15 PM
Last Post: Automatic-TC

Forum Jump:


Users browsing this thread: 1 Guest(s)